إن Laser Cutting Speed Calculator estimates a starting cutting speed based on material type, thickness, laser source, power, and assist gas. Use it to plan laser cutting parameters and guide initial test cuts. Actual results depend on the machine, optics, focus position, gas settings, and required edge quality, so verify the estimate against your machine manufacturer’s parameter charts.
Laser Cutting Inputs
النتائج
| مادة | |
|---|---|
| Thickness | |
| Laser source | |
| Rated laser power | |
| Assist gas | |
| Quality priority | |
| Nozzle diameter | |
| Focal position |
Verify before production: treat this as a starting point for parameter trials. Run test cuts, then inspect the kerf, dross, burr, striation and edge squareness, and adjust speed in small steps.
Important: Actual cutting speed depends on the laser machine, beam quality, optics, nozzle condition, focus position, gas pressure and purity, material grade and surface condition, and the edge quality you need. Consult your machine manufacturer’s parameter charts and validate settings through controlled test cuts.
