Discover the efficiency of our 90° Crossed Helical Gear Pair Calculator, designed to simplify your gear design and analysis tasks. This intuitive tool allows engineers and hobbyists to accurately calculate gear parameters, ensuring optimal performance and precision. With user-friendly interface and detailed results, our calculator is perfect for both quick checks and in-depth analyses. Enhance your project outcomes by integrating precise gear calculations up front, saving time and eliminating errors. Explore the benefits of precise engineering with our expert-developed helical gear pair calculator.
Parameter Description
Normal Module (mn): The basic size unit of the gear in the normal plane (mm).
Pressure Angle (αn): The pressure angle in the normal plane (degrees).
Number of Teeth (z): The total number of teeth on the gear.
Helix Angle (β): The angle between the gear axis and the helix line (degrees).
Helix Direction: The direction of the helix (Left/Right).
Normal Addendum Coefficient (ha*): Coefficient for calculating addendum.
Clearance Coefficient (c*): Coefficient for calculating clearance.
Shaft Angle (Σ): The angle between the axes of the two gears (for the pair).
Gear Ratio (i): The ratio of the number of teeth (for the pair).
Standard Center Distance (a): The distance between the axes of the two gears (for the pair).
Pinion (Small Gear) Calculator
Pinion Calculation Results
cos β:
–
Transverse Module (mt):
–
mm
Equivalent Number of Teeth (zv):
–
Pitch Diameter (d):
–
mm
Transverse Addendum Coefficient (ha*_t):
–
Addendum (ha):
–
mm
Dedendum (hf):
–
mm
Whole Depth (h):
–
mm
Tip Diameter (da):
–
mm
Root Diameter (df):
–
mm
Shaft Angle (Σ):
Requires Gear Pair Input
degrees
Gear Ratio (i):
Requires Gear Pair Input
Standard Center Distance (a):
Requires Gear Pair Input
mm
Gear (Large Gear) Calculator
Gear Calculation Results
cos β:
–
Transverse Module (mt):
–
mm
Equivalent Number of Teeth (zv):
–
Pitch Diameter (d):
–
mm
Transverse Addendum Coefficient (ha*_t):
–
Addendum (ha):
–
mm
Dedendum (hf):
–
mm
Whole Depth (h):
–
mm
Tip Diameter (da):
–
mm
Root Diameter (df):
–
mm
Shaft Angle (Σ):
Requires Gear Pair Input
degrees
Gear Ratio (i):
Requires Gear Pair Input
Standard Center Distance (a):
Requires Gear Pair Input
mm
